Products (Total Items: 15)
Sort by:
Secure your GCC or Roland blade with the TRW Blade Holder! This blade holder is compatible with all GCC Vinyl Cutters, with the exception of the Expert II. The TRW GCC / Roland blade holder is a afforable alternative to name brand blade holders. Blade Holder for GCC/Roland Cutters (2mm)
$44.99
Available In Stock
$24.99
Available In Stock
Instant Download Free Shipping
Replace the blade on your cutter with this Graphtec Cutter Blade - 60 Degrees. This blade is a 60 degree replacement for Graphtec Machine Cutters. The blade will fit into the standard blade housing for Graphtec Cutters. If you are cutting thinner materials such as Siser-Easyweed or ColorSpark-Holographic, we suggest the 45 degree blade for the best cut.
$17.95
Available In Stock
Craft Vinyl Replace your blade on your cutter with this Graphtec Cutter Blade - 45 Degrees. This blade is a 45 degree replacement for Graphtec Machine Cutters. The blade will fit into the standard blade housing for Graphtec Cutters. If you are cutting thicker material like Magic-Flock or Glitter-Vinyl, we suggest the 60 degree blade for the best cut. Cutter replacement blades for Graphtec Cutter Blades - 45 Degree AGTK
$17.95
Available In Stock
Ready for a blade replacement? Craft Vinyl Cutter replacement blades for Roland|GCC|Cricut Explore Cutter Blade - 65 Degrees 2mm is a replacement blade for the following cutters: Roland GS-24, GCC Expert IV, GCC Expert, Cricut Maker, Cricut Explore Air and Cricut Explore Air 2. This blade is not compatible with Cricut Joy. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. 2mm blades fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder. For Cricut Maker, Cricut Explore Air and Cricut Explore Air 2 you must use the pre-existing holder that came with your Cricut to hold the TRW replacement blade.To fit into the standard blade housing for the Jaguar V and Expert II you will need the The 2.5mm blade, this 2mm blade will not fit in their standard blade housing.
$14.95
Available In Stock
Ready for a blade replacement? This is a 65 degree replacement blade for the following cutters: GCC Jaguar V, Puma IV and Expert II cutters. The 2.5mm blade will fit into the standard blade housing for the GCC Jaguar V, Puma IV and Expert II. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. To fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder you will need the 2mm blade, this 2.5 mm blade will not fit in their standard blade housing.
$14.95
Available In Stock
Ready for a blade replacement? This is a 45 degree replacement blade for the following cutters: GCC Jaguar V, Puma IV and Expert II cutters. The 2.5mm blade will fit into the standard blade housing for the GCC Jaguar V, Puma IV and Expert II. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. To fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder you will need the 2mm blade, this 2.5 mm blade will not fit in their standard blade housing.
$14.95
Temporarily Out of Stock - Check back soon!
Ready for a blade replacement? Craft Vinyl Cutter replacement blade for Roland|GCC|Cricut Cutter Blade - 45 Degrees 2mm is a replacement blade for the following cutters: Roland GS-24, GCC Expert IV, GCC Expert, Cricut Maker, Cricut Explore Air and Cricut Explore Air 2. This blade is not compatible with Cricut Joy. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. 2mm blades fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder. For Cricut Maker, Cricut Explore Air and Cricut Explore Air 2 you must use the pre-existing holder that came with your Cricut to hold the TRW replacement blade. To fit into the standard blade housing for the Jaguar V and Expert II you will need the The 2.5mm blade, this 2mm blade will not fit in their standard blade housing.
$15.95
Available In Stock
$625.00
Available In Stock
Keep your blades secure with TRW CAMEO/Graphtec Blade Holder. This blade holder is compatible with the Cameo and Graphtec cutters sold on our site. Replace your blade holder at a fraction of the cost of name brand, with the TRW version!
$16.95
Available In Stock
Cutting Mat 12 by 12 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 12 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. If you need a lighter tack option, check out the Silhouette Cameo 12 inch Cutting Mat. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This mat is compatible with the full size Cricut and Silhouette Cameo Cutters.
$11.99
Available In-Stock
Cutting Mat 12 by 24 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 24 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This Cutting Mat 12 by 24 inches is compatible with the full size GCC Puma IV Cutter, GCC Expert II LX Cutter, GC Expert II Cutter, GCC Jaguar V Cutter and Graphtec CE7000 Cutter.
$15.99
Available In-Stock
$29.90
Available In Stock
$29.99
Available In Stock