Hotronix Tabletop Air Fusion IQ

Hotronix Tabletop Air Fusion IQ

Price: $4,450.00
*
*
SKU: TRW-Hotronix-Fusion-Air-IQ-Tabletop
MPN: XRF-TT
Brand: Hotronix
Availability: 3 to 4 week shipping lead time. Ships directly from the manufacturer.
Write a Review
The Hotronix Tabletop Air Fusion IQ is an touchscreen controlled press with unlimited presets.

 
  • This 16"x 20" Tabletop Fusion IQ features Threadability, which allows you to load your garment onto the press and decorate the front, back or side without having to remove it from the platen.
  • The 3/4" inch upper platen is coated with non-stick teflon. Time and temperature are digitally displayed. A dedicated circuit breaker is required for use
  • An air compressor (sold separately) with minimum ½ horsepower and 2-gallon hold tank is required to use this press.
  • This press is perfect for rhinestones, heat transfer vinyl, sublimation, screen print transfers, direct-to-garment prints, and more!
  • To claim your bonus kit, make a selection from each "Mini Pack Selection" drop down menu before adding to cart.


Have questions? Need craft ideas? TRW's blog has 100's of video tutorials, how-to guides, craft ideas, and expert tips for working with vinyl and rhinestones.

Reward Points

890 points will be rewarded to you when you buy this item.

Related Items

Protective Cover Sheet also known as Teflon sheets or non-stick sheets, act as a barrier between the heat element and the garment during the heat printing process. Protective Cover Sheets are commonly used with Heat Presses when transferring designs to ensure a smooth, semi-gloss finish on graphics. When layering Heat Transfer Vinyl or adding Hotfix Rhinestones Rhinestones to a design, place the cover sheet on top of your garment before using the heat press to protect the first layer. When printing the front and back of a shirt, place the protective sheet cover between the fabric to prevent the shirt from sticking together. Protective Cover Sheets are reusable. They will only need to be replaced if they become ripped, creased or wrinkled to the point of ineffectiveness. This protective sheet is 9.75 by 9.75 inches. If you need a smaller sheet check out the 18 inches by 20 cover sheet.
$6.95
Available In Stock
Protective Cover Sheet also known as Teflon sheets or non-stick sheets, act as a barrier between the heat element and the garment during the heat printing process. Protective Cover Sheets are commonly used with Heat Presses when transferring designs to ensure a smooth, semi-gloss finish on graphics. When layering Heat Transfer Vinyl or adding Hotfix Rhinestones Rhinestones to a design, place the cover sheet on top of your garment before using the heat press to protect the first layer. When printing the front and back of a shirt, place the protective sheet cover between the fabric to prevent the shirt from sticking together. Protective Cover Sheets are reusable. They will only need to be replaced if they become ripped, creased or wrinkled to the point of ineffectiveness. This protective sheet is 18 inches by 20 inches. If you need a smaller sheet check out the 9.75 by 9.75 cover sheet.
$16.95
Available In Stock
Heat Press Pillows also known as heat transfer pillows or heat printing pillows are non-stick foam inserts used with Heat-Presses during the heat printing process. Heat press pillows are recommended when pressing a garment with zippers, buttons, snaps, collars or thick seams. When used, raised elements of the garment sink down into the pillow, eliminating pressure points and creating a more even pressing surface. Without the Heat Press Pillow, the heating element is unable to make a tight, smooth seal on the Heat-Transfer-Vinyl. They also eliminate any indentation that can appear from the heat press outside edges. To use, place the pillow inside or underneath the garment, adjust your heat press using the knob atop the upper platen to accommodate the new thicker pressing surface and begin pressing. Heat press pillows are reusable. This pillow is 12 inches by 14 inches and 6mm thick. It also is available in a 5.5-by-22-rectangle size and a 5.5-by-5.5-square size. Improve the final result of vinyl applications to backpacks, hats, hoodies, reversible mesh jerseys, baby onesies, and any garment with raised surfaces, using a Heat Press Pillow. Do I need a Heat Press Pillow or Protective-Cover-Sheet? If your garment has raised surfaces like zippers, buttons, or thick seams, you will need a Heat-Press-Pillow to ensure equal pressure when applying Heat-Transfer-Vinyl. If your garment does not have raised surfaces, but you will be creating a multilayered Heat-Transfer-Vinyl design or adding Hot-Fix-Rhinestones on top of vinyl, you will need a Protective-Cover-Sheet.
$19.95
Available In Stock
Heat Press Pillows also known as heat transfer pillows or heat printing pillows are non-stick foam inserts used with Heat-Presses during the heat printing process. Heat press pillows are recommended when pressing a garment with zippers, buttons, snaps, collars or thick seams. When used, raised elements of the garment sink down into the pillow, eliminating pressure points and creating a more even pressing surface. Without the Heat Press Pillow, the heating element is unable to make a tight, smooth seal on the Heat-Transfer-Vinyl. They also eliminate any indentation that can appear from the heat press outside edges. To use, place the pillow inside or underneath the garment, adjust your heat press using the knob atop the upper platen to accommodate the new thicker pressing surface and begin pressing. Heat press pillows are reusable. This pillow is 5.5 inches by 5.5 inches and 6mm thick. It also is available in a 5.5-by-22-rectangle size and a 12-by-14-square size. Improve the final result of vinyl applications to backpacks, hats, hoodies, reversible mesh jerseys, baby onesies, and any garment with raised surfaces, using a Heat Press Pillow. Do I need a Heat Press Pillow or Protective-Cover-Sheet? If your garment has raised surfaces like zippers, buttons, or thick seams, you will need a Heat-Press-Pillow to ensure equal pressure when applying Heat-Transfer-Vinyl. If your garment does not have raised surfaces, but you will be creating a multilayered Heat-Transfer-Vinyl design or adding Hot-Fix-Rhinestones on top of vinyl, you will need a Protective-Cover-Sheet.
$11.95
Available In Stock

You May Also Like

Cutting Mat 12 by 12 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 12 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. If you need a lighter tack option, check out the Silhouette Cameo 12 inch Cutting Mat. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This mat is compatible with the full size Cricut and Silhouette Cameo Cutters.
$11.99
Available In-Stock
Cutting Mat 12 by 24 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 24 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This Cutting Mat 12 by 24 inches is compatible with the full size GCC Puma IV Cutter, GCC Expert II LX Cutter, GC Expert II Cutter, GCC Jaguar V Cutter and Graphtec CE7000 Cutter.
$15.99
Available In-Stock
Magic Heat Tape also known as heat-resistant tape, high temp tape, thermal tape, or polyester film tape, prevents heat press designs from shifting during the pressing process. Magic Heat Tape is ½ inch wide and 216 feet long. It easily peels off with the vinyl’s backing after the design has been pressed. The purpose of Magic Heat Tape is to hold transfers in place during application. It won’t leave a residue or melt into your garments. This semi-transparent tape works wonders on multilayer, multicolored or oversized designs to prevent them from shifting. Magic Heat Tape is ideal to use with Heat-Transfer-Vinyl, Rhinestone-Hot-Fix-Transfer-Tape, and Hot-Fix-Rhinestones on a Heat-Press-Machine.
$11.99
Available In Stock